Various Parts of Hydraulic Press Brakes

The press brake is used to bend thick, heavy sheets or to create complex bends from thin materials. There are two types: hydraulic and mechanical press brakes. Hydraulic presses are more suitable for specific jobs because they require a lot of power to bend sheets and plates. 

To fully comprehend the operation of a hydraulic press brake, it is important to understand how it works. Hydraulic press brakes can be complicated to keep track of because they are composed of many components. You can also find different hydraulic press components via www.macrodynepress.com/hydraulic-press-spare-replacement-parts.

Image Source: Google

Here is a list of some of the most important components.

1. Hydraulic fluid – Hydraulic fluid flows through different parts of the machine. The hydraulic pump exerts high pressure on hydraulic fluid, resulting in a highly energized fluid. The fluid travels to the hydraulic pump, where it creates high pressure. 

The de-energized hydraulic fluid then travels to the pump to replenish its energy and continue to operate the machine. Hydraulic fluid is typically petroleum oil mixed with additives.

The hydraulic fluid transfers energy and also lubricates various parts of the hydraulic press brake. It also removes contaminants and metal fittings. The hydraulic fluid must be able to operate at high temperatures up to a few hundred degrees Celsius as it heats up when it is fed energy from the hydraulic pump.

2. Hydraulic pump- This hydraulic pump generates hydraulic fluid power and transmits it to the machine for pressing operations. A pump with a rating of 5,000 PSI can either maintain liquid flow against loads up to 5,000 PSI or can exert that much pressure. 

3. Actuator-The hydraulic fluid's power is delivered to the actuator. This performs the pressing operation. There are many types of actuators available, but the hydraulic cylinder is the most common. A hydraulic cylinder consists of a piston and a barrel.